Local Uncategorized

Reupholstering an Old Chair’s Seat with Scrap Fabric

A work in progress – how to reupholster a chair seat for cheap or free, with scrap fabric and recycled stuffing. These pictures show some of the progress.

This chair’s seat had torn, and the foam was coming out. I wanted to reupholster it, but for as little money as possible.

I watched a few YouTube videos about reupholstering seats, and the pros seem to be able to do it in 20 minutes. What you see above is the result of three hours of work! It’s still not finished.

Of course, the people doing the seats professionally have better tools, like pneumatic staplers. They also use new fabric, foam cut into shape, and the seats they’re fixing aren’t quite as messed up as this one. They also end up doing a nicer job, but this is my first seat, ever, so, I’m happy with the work so far.

Almost Free Fabric

Upholstery fabric is pretty expensive. I’ve seen it going for $20 a yard downtown.

I don’t have a hookup for fabric, so I turned to my usual sources: my own clothes. I had some blue denim left over from when I cut my pants into cutoffs. These were denim with a little stretch yarn in there – and I think that was a bad fabric to choose, because stretch is bad.

The other fabric is a pair of shorts that developed a rip in the side. So I cut it apart and got a big scrap of fabric to augment the blue denim.

I think the price of the pants was $2 from the Goodwill Outlet. $2 for both. They don’t have that pricing anymore. If you’re in Southern California, you can get pants for a dollar at any Goodwill on Thursdays, when they do their $1 sale. You can also find drapes at the Goodwill Outlet, and I think they charge $2.50.

My scrap pieces of fabric were sewn together by hand. It took over an hour to get these three pieces together, because I don’t use a sewing machine.

Free Stuffing

Batting and fill material is freaking expensive. Just look up “batting” or “fill”. A 5 pound bag of dacron fill is $25. 1 pound is $14. It’s the shipping that makes it expensive.

Foam is also pretty expensive. 22″ x 22″ x 2″ foam at Home Depot is $6.

The cheap way around this is to find an old pillow. You probably have one that’s kind of disgusting, but you keep using it, instead of spending $7 to buy a new pillow. Use the fill from that.

What I did was even cheaper. My housemate was throwing out a broken stuffed chair/recliner. I got the knife out and removed the stuffing, which was conveniently in these thin paper fabric bags. I got a huge 30 gallon trashbag worth out of it. I also got additional upholstery fabric!

So, keep an eye on the curb, and if you spot some not-too-shabby, cheap furniture being thrown out, take a good sniff to see that it’s not totally disgusting… if it’s OK, you can harvest the filling, batting, and even the upholstery material.

Dismantling the Old Seat

The YouTube videos had tips on how to take apart the old seat. You should watch and follow them. You need to get at least these tools.

Stapler, awl, pliers, gloves, scissors, needle, thread.

To tear the old seat apart, you need an awl. This is absolutely necessary and costs around $5 to $10 at a hardware store. It’s the only way you’re going to remove the old staples.

You use the pliers, or better, “dykes” if you have them. Dykes are a sexist slang for side cutters. They’re used to cut wire, but more importantly, they can grip the staples to pull them out.

Wear gloves or you’ll get splinters and cuts all over your hands.

So, all I did was remove the old fabric, remove the foam, and try to remove all the old staple bits. It took a long time, probably an hour, but I had some prior experience from another chair I’m working on, so the first time, it should take a while. Be careful and don’t hold anything in a way where the awl can slip and stab you. Always hold the seat from the side, and push the awl away, while you twist it to get under the staple.

Attaching the New Fabric and Stuffing

I’m a total newbie so I just made it up. I tacked the fabric on the front side of the seat, and adjusted it so it was kind of straight. Then I tacked across all the front.

I then folded over the sides, but didn’t tack them. I pulled the fabric on the front forward around half an inch (so I’m adding a full inch of height at the front). Then I did the same to the sides. I put in a few preliminary tacks on the sides. These are temporary.

The whole thing formed a “bag”, and I stuffed the bag with the fill. It took a lot of fill, and I pushed it down. However, I didn’t push enough, because I didn’t stuff the corners enough.

Next, I pulled the back part over, and tacked it in with one staple. This was a temporary one

Then, I pulled one side tight. This was pulling the fabric toward the center line around an inch, so the stuffing would get tight. I stapled the material down.

I ran out of staples.

Finishing it off will be pretty simple. I will pull the other side down, tight, about an inch toward the center line. Then I’ll fix up the corners so they aren’t so ugly – but I won’t be able to really get them right because they weren’t started right.

Then, I’ll pull the back down an inch, maybe more, to tighten up the front-to-back tension, and staple that down. I want to seat to feel like a seat, not a pillow.

Bugs and Fixes

The front corners weren’t stuffed enough, and are just “flat”. You can feel the wood seat. It’s not cool. If I do this again, I’ll try to stuff the corners with old foam, so I could get a good “shape” on the corner.

I’d also consider stuffing the edges with rolls of fabric, or something harder than fill.

I bought the wrong stapler. That’s an Arrow T50, which is the classic big stapler. It’s too big. The right stapler is one step down and uses thinner staples. I got my stapler on auction on Ebay, for $12, so it wasn’t too bad. I’ll keep using it, but a smaller one would have been better, and easier on the hands.

I think the smaller one is the JT21. Look for any stapler that is compatible with JT21 staples.

There You Go

When this isht is done, it’s going to look pretty cool and feel super comfy. It’s all fabric, so it’s nude-ass compatible. It’s all DIY and trashy-looking. For real DIY, not just looking like DIY. Real trash√©.

History Local

Treasure Chest, Robert Louis Stevenson Jr. High School Yearbook, 1939

Bought at a local estate sale, this yearbook is a look into history, into the East Los Angeles community. East Los Angeles was an unincorporated area east of the Boyle Heights neighborhood of Los Angeles. Many of the residents there came from Boyle Heights, which was a “melting pot” of different cultures.

According to the Home Ownership Loan Corporation maps, these two communities were unique in that they had a large diversity of ethnicities. For the same reason, they were also seen as a threat to the country and others — and this community was “redlined” by the real estate business, by the government, and society at large.

Despite this oppression, the community persevered and celebrated their diversity, and asserted their inclusion into America.



Hello, neighbor to my dead family.

A photo on a headstone,

a teenage boy, his hair in a pompadour,

collar rumpled,

smiling, facing the sun,

one of the neighborhood guys.

Dead at age 18, in the 1950s,

buried in the neighborhood.

Tono, the only name on the grave.

Japanese headstones stand at attention,

waiting for children to arrive,

and honor the ancestors.

Will this teenaged man stand forever,

waiting for his parents,

delirious with madness, filled with tears,

carrying flowers?

Each year, growing older, hair whiter,

skin more mottled

and translucent, back hunched.

Each year, memories fading like the

signal of an AM radio playing oldies,

as you drive away from Los Angeles.


About that shocking video of hundreds of homeless people in Orange County

People need to be ready to be stunned by what they see.


Letter to Garcetti about Shipping Container Homes

Mr. Mayor:

Thank you for finally doing something to help house the homeless people around the Plaza. It’s gone out of control, with rents rising, and whatnot. People don’t think it’s a big deal to live out of a tent or their car, anymore. That’s where we’re at, as a city and country, and I find that sad.

People have been complaining about the cost for the trailers at Main St. I’m not one of them, but I did have an idea that would be popular with some young people.

Living in Repurposed Shipping Containers

Personally, I’m not into the idea of living in containers. I only see a lot of headaches, and think it can be cheaper, in the long term, to just build regular apartments, if the process were made smoother. But I’m just one person. The masses of people think container living is trendy. The idea of small housing for under $20k per unit has wide appeal.

Local Politics

Recent Mean and Hateful Comments on YouTube Anti-Gentrification March Video

I don’t know why, but there is so much hate and rage on YouTube.¬† I have a video from a Defend Boyle Heights anti-gentrification march, and there are some pretty mean comments.


Pasadena and Altadena: Justice Vigil for Chris Ballew Jan. 4, Comment Jan. 5

Coalition for Increased Civilian Oversight of Pasadena Police is demanding police accountability for their unjustified beating of Chris Ballew. There are two upcoming events to show solidarity.

  • Tomorrow, the 4th, a Vigil in Old Town Pasadena to increase visibility.
  • Monday, the 5th, public comment at the City of Pasadena public safety committee meeting.

See the linked page for all details.

Source: Calling all Pasadenans and Altadenans: Police Chief to present on Monday night.